The 200ADM-P is a current injection system with a wide range of advanced features including phase shift, data storage and harmonic analysis.
The unit has a range of outputs allowing injection of currents between 1mA and 200A. Voltages up to 240V are available on the main outputs allowing high impedance current relays to be tested. True RMS metering with single cycle capture is provided. 4 current ranges allow the full scale of the meter and trip level to be set independently of the selected output. Industry standard safety connectors are used throughout for safe, reliable convenience.
The unit has a comprehensive timing system linked to the outputs allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy. The timer includes a current operated mode and can accurately test instantaneous trips.
Two USB host sockets are provided to connect a memory key, keyboard or printer. Results of every test can be stored to the memory key in spreadsheet format for later analysis. The keyboard allows entry of a comment against each result. In addition a graphics file of the waveform may be stored to the memory key. Harmonic analysis results can also be recorded.
If you require further information on this or any additional instrumentation, please contact us via the details shown at the bottom of this page.
Test and Measurement Hire have a comprehensive range of 1ph and 3ph, self contained, Primary and Secondary Current Injection Test Sets available for protective relay testing, click here for details. |
| Click here to download the 200ADM-P data sheet (right click and choose 'Save Target As'). |
|
