The HVA60 is not only the most advanced HV test
system available, it is also the lightest, most compact instrument
of its type on the market. The HVA60 has the highest power to weight
ratio of any comparable unit available.
There is no need to carry two pieces of equipment around and then
interconnect them!
Apart from the variable frequency VLF output, the operator can
also select dual polarity DC and cable jacket or sheath testing
outputs modes.
The applied test voltage, current,
capacitance, resistance and time are displayed and recorded.
The instrument is easily programmable allowing the operator to setup
or select test sequences in either automatic or manual mode.
The
HVA60 is capable of testing 1μF (Approx. 10,000 ft/ 3000m of cable)
at 0.1Hz and 62kV peak. The frequency of the output can also be
reduced allowing even larger capacitance loads to be tested. At
0.02Hz, approx. 50,000 ft/15,000m of cable can be tested.
If you require any more information on the HVA 60 4 In 1 Universal High Voltage Test System or wish to discuss any other instrumentation requirements, please contact us via email or phone using the details shown below. |
Click
here to download the
HVA60 Datasheet in PDF Format
|
|
