|
Home
 |
T&R PCU2/E 6000A Primary Current Injection System
|
The PCU2/E Mk4 primary current injection system is ideally suited
to commissioning and maintenance testing where very high currents
are required. The system consists of separate control and loading
units for maximum flexibility. The control unit contains all control
and metering circuitry, and is linked to the loading unit by control
and metering cables.
The control unit may be used with one of a range of loading units
providing between 3000A and 6000A of output current. Each loading
unit has two outputs which may be connected in series or parallel
for maximum flexibility. For example, the LU6000 may be configured
to either give a maximum current of 3000A at 6.6V or 6000A at 3.3V.
Features
· 20kVA output capability
· Continuously variable output
· Multi-function timing system
· Digital true RMS ammeter with memory
· Bright LED displays
· Automatic switch-off at end of test
· Centralised control and metering
· Separate control and loading units
· Loading units from 3000A-6000A
· Low impedance, dual-range outputs
If you require any more information on the PCU2/E 6000A
Primary Current Injection System or wish to discuss any other instrumentation requirements, please contact us via email or phone using the details shown below. |
Click
here to download the
PCU2/E 6000A Primary Current Injection System Datasheet in PDF Format
|
|
|
|
|
Test and Measurement Hire Ltd, Rental Solutions House, 16 Swordfish Close, Swordfish Business Park, Burscough, Lancashire, L40 8JW
Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager :
Ken Carine
Measurement House, Units 12/13 Harlaw Industrial Estate, Harlaw Way, Inverurie, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager :
Gordon Thow
|
