The DT800 has 42 analogue inputs, giving 42 separate single ended channels or 24 differential channels. These are isolated and over voltage protected, with measurement across 12 auto-scaling ranges from 10mV to 13V full scale.
All common measurement types are supported, including DC and AC (RMS) voltage, current, resistance, temperature, bridges, strain gauges, 4-20mA loops and frequency. Adjustable excitation and triggering are provided on all channels. A Serial Sensor Port is also included.
Digital I/O consists of 8 digital input channels, and 8 digital I/O channels. Two of the digital inputs have adjustable threshold for the monitoring of low level signals. Digital state, counts at up to
10kHz and triggering are supported on all digital channels.
An RS232 port, a 10baseT Ethernet port and a PC card port are provided as standard for dataTaker programming and data retrieval. Data can either be returned in real time or stored to internal RAM or a memory card. The DT800 stores programs and data DOS format enabling full compatibility with Windows.
The DT800 has modem dial-in and dial-out capability. TCP/IP is supported, which means that the DT800 can communicate over a local area network. In addition, an on-board FTP server is provided so that files can easily be transferred via the Ethernet or RS232 ports.
Software
All dataTaker systems come with a powerful and comprehensive software suite enabling setup, graphical programming, mimics, plotting and spreadsheet views of your data.
This software makes data acquisition simple and effective.
Configuration Options
Two wire: 24, or 42 with one shared terminal
Three wire: 12, or 18 with one shared terminal, 36 with two shared terminals
Four wire: 12, or 18 with two shared terminals
Six wire bridges: 6, or 18 with two shared terminals
Sensor configurations may be mixed in any combination.
- The dataTaker DT800 is the first in a new series of faster and smarter measurement systems.
- Combined data acquisition, data logging and Controller
- Robust and stand alone
- High Speed burst triggered sampling mode (1kHz to 100kHz) 16 Bit Resolution
- Battery backed internal SRAM & ATA Flash card support
- External 11-28Vdc supply or internal battery operation
- Powerful operating system and internal file structure
|
