Test Equipment & Instrumentation, Hire, Sales & Technical Services


Druck DPI 705 Series Handheld Pressure Indicators


Home

 Druck DPI 705 Series Handheld Pressure IndicatorsDruck DPI 705 Series Handheld Pressure Indicators
  • Ranges 0 to 70 mbar through to 700 bar
  • 0.1% FS accuracy
  • Rugged, lightweight handheld design
  • Leak test, tare, max/min and filter
  • Intrinsically safe version
  • Pneumatic and hydraulic test kits
  • Standard ranges available ex-stock

Intrinsically safe (I.S.) versions certified to European and American standards for use in hazardous areas. Compact, robust and lightweight, the DPI 705 is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting.

The DPI 705 is ready for use anywhere, anytime...

  • I.S. version for hazardous areas
  • Impact resistant, sealed to IP54
  • Clear high resolution LCD
  • Carry case with belt loop
  • Long battery life
  • Integral desk stand and hanger
  • No warm up time
  • 16 pressure units
  • 1 minute leak test
  • Dual pressure fitting - G 1¼8 and hose
  • Ambient temperature measurement

Pressure units

  • mbar, bar, psi, mH2O, inH2O (4 and 20°C), ftH2O (4 and 20°C), inHg, mmHg, mHg, Pa, hPa, KPa, MPa, Kgf/cm2 and an optional user defined scale.

Leak test

  • Standard 60 second leak test.

SPECIAL FEATURES

  • Zero - zero pressure correction.

  • Tare - 0 to 100% FS zero offset capability.

  • Filter - a 10 reading rolling average for unstable pressures.

  • Alarm - adjustable high pressure alarm with visual and audible warning.

  • Ambient temperature - °C and °F reading of local condition (+/- 1.5°C).

  • Calibration - used with the optional pneumatic or hydraulic test kits the DPI 705 becomes a low cost calibration tool for gauges and indicators.

  • Power management low battery indicator and selectable ‘Auto Off’.60 second timer Pressure change

  • Max/Min - Captures both maximum and minimum readings. Maximum value Minimum value

Safety conformance

  • EN61010, EN50081-1, EN50082-2, CE marked.

Intrinsically safe version

  • EEx ia IIC T4 (-10 to 50ÞC)

  • To EN50020 : 1994 and EN50014 : 1992

  • Ex ia IIC T4 (-10 to 50ÞC)

  • To CAN/CSA - E79 - 11 - 95 and CAN/CSA E79 - 0 - 95

  • (Division 1, class 1, Groups A, B, C and D)

 

Top Of Page
To add this site to your favourites click here
BACK TO:  Pressure Indicators

Search this site  

 

Test & Measurement Hire ltd, 16 Swordfish Close, Swordfish Business Park, Burscough, Lancs, L40 8JW
 Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager : Ken Carine


Measurement House, Units 12/13 Harlaw Industrial Estate, Harlaw Way, Inverurie, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager : Gordon Thow

 
Visit our Environmental Monitoring Services website