Test Equipment & Instrumentation, Hire, Sales & Technical Services |
Katronics ADM 6725, Portable dual mode flowmeter
|
|
Home
|
Katronics ADM 6725, Portable dual mode flowmeter
The FLUXUS range of non-invasive flowmeters utilises ultrasonic
technology for the accurate flow measurement of liquids in full pipes.
The portable device has been designed to meet the needs of the
Service/Maintenance and Commissioning Engineer wishing to check the flow
rate of liquids at different locations in the plant. The set-up of the unit
is simple and user friendly in order to obtain the required flow information
in minutes.
The measurement of flow is based on the principle that sound waves are
influenced by a flowing medium. Measurements are made by penetrating the
pipe with ultrasound and subsequently time differences, frequency variations
and phase shifts of the ultrasonic signals are evaluated.
The ultrasonic sensors are clamped onto the outside of the pipe, thus
eliminating the need to dismantle the pipework and interrupt the process.
The FLUXUS ADM 6725 can be applied to any type of standard pipe carrying
clean or dirty liquids.
Advantages
- Low installation effort and costs
- Dual measuring mode (transit-time and NoiseTrekTM)
- Measurement is independent of fluid conductivity and pressure
- No pressure loss, no possibility of leakage
- Retrospective installation for existing plants possible
- No cutting of pipes necessary, no interruption of process, no plant
shut down
- No additional fittings for maintenance required
- Hygienic measurement, no risk of contamination, suitable for ultra
clean liquids
- No contact with medium, no risk of corrosion when used with aggressive
media
- Cost advantages when used with large diameter pipes, high pressure
systems, etc.
- Easy to install clamp-on sensors with no process interruption
- Non-invasive flow measurement of liquids, no pipeline disturbance, no
pressure loss
- Suitable for all commonly used pipe materials with pipe diameters from
6 mm to 6.5 m (1/4" to 256")
- Integrated wall thickness measurement, 2 flow channels
  
|
|
|
Test & Measurement Hire ltd, 16 Swordfish Close, Swordfish Business Park, Burscough, Lancs, L40 8JW
Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager :
Ken Carine
Measurement House, Units 12/13 Harlaw Industrial Estate, Harlaw Way, Inverurie, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager :
Gordon Thow
|
|
|
|
|
| |
