|
Kikusui 5101 up to 10kv AC
AC/DC 10 kV
Transformer Capacity: 500 VA
The Model TOS5101 is a withstanding voltage tester having a
high test voltage of 0 to 5 kV or 0 to 10 kV (transformer capacity: 500 VA)
that allow both application of AC and DC. The use of a high luminance, large
fluorescent display tube for the display enables data including measured
values, status and judgement results to be extremely legible in comparison
with previous models.
The Pass/fail function employs a window comparator method that
enables TOS5101 to make fail judgement of current leakage over the upper
reference value and below the lower reference value set on the front panel.
Thus, highly reliable testing can be performed including that for test lead
disconnection and defective contact. By employing the remote control function
for start and stop operations and using this function with the judgement
result output function enables greater automation and efficiency of testing.
In addition, in order to prevent erroneous operation and
accidents, the TOS5101 is also equipped with a key lock function and interlock
function, a high-voltage output terminal having a narrowed insertion port, a
large DANGER lamp, and an automatic discharge function (during DC operation)
that removes charge from the test piece. These features give the TOS5101 a
high degree of safety and reliability.
Features
-
Complies with various safety standards
-
AC/DC output (0 to 10 kV)
-
Large colour display
-
Digital voltmeter and ammeter
-
Digital timer
-
Window comparator type employed for Pass / fail judgement.
-
Equipped with remote control function
-
Various signal outputs
-
Automatic discharge function (during DC operation)
-
Provided with zero turn-on switch
-
Compact size
 Click image to enlarge
| 
