|
One Inch Trimec c/w IS Totaliser
 Multipulse
PD flowmeters utilise the widely accepted oscillating piston design
principle in conjunction with modern engineering materials, to provide a
cost effective and reliable solution for a wide range of industrial flow
measurement applications.
Design Simplicity
Its
simple and robust design has the advantage of only one moving part with both
high resolution open collector and reed switch outputs as standard.
As
each piston rotation passes a known liquid volume, the inherent
repeatability of the Multipulse positive displacement flowmeter makes it
particularly compatible with batching and dispensing duties.
Flexibility
of Application
Commonly
metered liquids range from non-conductive low viscosity solvents through to
extremely viscous lubricants, chemicals and food bases.
Application flexibility is further enhanced as meter performance is
independent of flow profile eliminating the restrictive need for straight
pipe runs required with most alternate metering technologies.
The
Multipulse has no stagnate chambers to harbor contaminants. There is no
restrictions on mounting orientation and the flowmeter may be operated under
vacuum flow, pumped flow or gravity
flow conditions
Features
- IP67
(Nema 4X) 316L stainless steel or aluminium construction
- Nominal
flow range 120 to 3000 lph (0.5 to 13.2 USGPM)
- Performance
independent of flow profile
or mounting orientation
- Single
moving part
- Pressure
to 350 bar (5150 psi)
- Temperature
to 150°C (300°F)
- Both
open collector and reed switch outputs as standard
- Measures
low and high viscosity liquids up to 1,000,000 centipoise
- Adaptable
to hygienic applications
- Threaded, flanged or hygienic process connections
- Explosion
proof or intrinsically safe operation
- Integral
or remote self powered flow rate-totaliser with scaled pulse, analog and
flow alarm outputs
- Integral
or remote high speed preset batch controller
| 
